About reliability engineering
Reliability engineering is the discipline of preventing equipment failure and controlling operational risk across an asset base. It uses structured methods to find how assets can fail, why they actually fail, and which maintenance or design response the consequence justifies. Reliability engineers apply it to physical assets such as pumps, motors, and production lines. They combine engineering judgment with failure data across maintenance, operations, and design teams.
This guide covers what the discipline includes, what a reliability engineer does day to day, the core methods and metrics, and common certifications. It also covers where reliability maintenance engineering breaks down when findings never reach the work order.
What does reliability engineering cover?
Reliability engineering covers three connected activities. It prevents failure before it happens, investigates failure after it occurs, and controls risk across an asset base over its life.
Prevent failure: Proactive analysis of how and why assets can fail, so the maintenance or design response is chosen before a breakdown, not after.
Investigate failure: Root cause work once a failure occurs, with the findings fed back into prevention instead of closing as a one-off repair.
Control risk: Ranking assets by criticality, so effort goes where a failure costs the most in safety, output, or money.
Reliability engineers draw on a named toolkit for this work:
Failure Mode and Effects Analysis (FMEA) and its criticality-scored variant, FMECA, catalog how each asset can fail and what each failure causes. The FMEA (Failure Mode and Effects Analysis) glossary entry explains the method in full.
Reliability-Centered Maintenance (RCM) is the decision framework that turns failure analysis into a maintenance strategy per asset. The Reliability-Centered Maintenance (RCM) entry covers it in detail.
Statistical failure modeling, such as Weibull analysis, estimates failure probability over time for assets with enough failure history.
The strategy that comes out of this work is usually a proactive one. Depending on the failure pattern, that means preventive maintenance on a fixed interval or predictive maintenance triggered by asset condition.
What does a reliability engineer actually do?
A reliability engineer finds why assets fail, ranks risk across the asset base, and matches the maintenance strategy to each failure pattern. The role sits between analysis and execution, and most of the week goes to five activities:
Investigating failures. The engineer runs root cause analysis and decides whether the cause is a maintenance gap, an operating condition, or a specification problem.
Ranking risk. The engineer builds the criticality assessment and the failure mode catalog for the asset base.
Recommending strategy. The engineer proposes the maintenance approach that fits each asset's failure pattern and consequence, and helps planners put it in place.
Tracking reliability KPIs. The engineer watches the trends covered in the next section.
Working across functions. The engineer partners with maintenance, operations, and design engineering, because a chronic failure sometimes means changing how an asset is used or specified, not only how it is maintained.
Two operational facts show why this role is hard to do well. Typically 80% of mean time to repair (MTTR) goes to figuring out what caused a failure, not fixing it (ReliablePlant). Separately, a 2024 RCA intervention-strength study (PSNET / Siemens) rated 57% of corrective actions from root cause investigations as weak. That means the finding did not reliably prevent recurrence.
The value of the role is won or lost after the analysis. What counts is whether the findings change what gets done next.
How reliability engineering is measured
Reliability engineering is measured by trends in a small set of failure and availability metrics, tracked over time rather than as a single snapshot. Four metrics form the core:
Mean Time Between Failures (MTBF): The core metric. A rising MTBF means failures are becoming less frequent.
Mean Time to Repair (MTTR): How fast an asset is restored once it fails.
Failure rate: The inverse of MTBF, useful for spotting deteriorating assets early.
Overall Equipment Effectiveness (OEE): Combines availability, performance, and quality into one measure of how well an asset turns planned time into good output.
Reliability programs typically add planned-maintenance percentage and maintenance compliance rate to this list. A reliability engineer is judged on whether these numbers improve over months and years. A single bad week says little, while a steady decline in MTBF on a critical asset is an early warning that the current maintenance strategy no longer fits the way that asset fails. The asset reliability glossary entry goes deeper on the metrics themselves.
Common reliability engineering certifications
The most widely recognized reliability engineer certification is the Certified Reliability Engineer (CRE), offered by ASQ (American Society for Quality). Three credentials come up most often:
Certified Reliability Engineer (CRE): The discipline-specific credential from ASQ.
Certified Maintenance and Reliability Professional (CMRP): A closely related credential with a broader maintenance-management scope.
Six Sigma Green Belt and Black Belt: Common among reliability engineers for their statistical root cause and process-improvement methods.
A certification signals formal training in these methods. It is not a requirement to practice, and in many organizations a maintenance manager or asset professional performs the function without the formal title.
Why reliability engineering fails if analysis does not become action
Reliability engineering fails when its findings stay in a report instead of changing the next work order. The discipline produces a root cause, a criticality ranking, or a recommended maintenance strategy. A finding that sits in a spreadsheet does not change what a worker does on the next job.
The outcome shows up in the data. The 2024 RCA intervention-strength study found that more than half of corrective actions were rated weak. The analysis happened, but many resulting actions were too weak to prevent recurrence. A program measured only by how many analyses get completed will keep re-diagnosing the same failures. Each repeat failure then costs another round of diagnosis, the step that already takes most of the repair time. The better question for any reliability program is how many findings were executed, not how many were written.
The fix is to carry each finding into scheduled, tracked work with a named owner and a deadline. The next section covers how software supports that.
Reliability engineering in Ultimo
Reliability engineers use Ultimo to carry root cause findings into follow-up work, so the analysis does not stop at diagnosis. Ultimo is Intelligent Asset Management software: Enterprise Asset Management (EAM) with AI embedded in the everyday maintenance workflow to support reliability engineers.
The Embedded AI capability that matters most here is the RCA follow-up assistant. It turns root cause analysis into actionable follow-up items, rather than leaving the finding as documentation. That speaks directly to the weak corrective actions described earlier.
Reporting and Dashboards gives maintenance, operations, and reliability colleagues one view of the same data across departments, so reliability trends are visible to the people who act on them.
Separately from the two AI capabilities above, Kisuma Chemicals, an Ultimo customer, demonstrated a 40% downtime reduction through FMECA-driven reliability work. That is one customer's outcome, not a universal guarantee.
Frequently Asked Questions
Is reliability engineering the same as site reliability engineering (SRE)?
No. Reliability engineering, as covered here, is the industrial and asset-management discipline focused on preventing equipment failure and controlling physical asset risk. Site reliability engineering (SRE) is an unrelated software and IT-operations discipline, pioneered at Google, focused on uptime, latency, and automation for digital systems. The two share a word and a concern with failure, but they apply to different systems and use different methods. A practical test is the asset in question: reliability engineering works on pumps, motors, and production lines, while SRE works on servers, services, and software releases. This article stays entirely on the physical asset side.
What does a reliability engineer do?
A reliability engineer works out why equipment fails and decides how to stop a repeat. Day to day, that means ranking asset risk and recommending the maintenance strategy that fits each failure pattern. The role also covers tracking reliability KPIs such as MTBF, MTTR, and OEE. It works across maintenance, operations, and design engineering, because chronic failures sometimes need a change in how an asset is used or specified. In practice, that means root cause analysis, criticality ranking, strategy recommendations, and trend tracking. Many reliability engineers hold a CRE or CMRP credential, though neither is required to practice.
What is the difference between reliability engineering and reliability-centered maintenance (RCM)?
Reliability engineering is the broader discipline, and reliability-centered maintenance (RCM) sits inside it. RCM is a structured decision framework that turns failure analysis into a maintenance strategy for each asset. Reliability engineering also includes FMEA, root cause analysis, and ongoing metrics tracking. FMEA, for example, feeds RCM by cataloging the failure modes that RCM then answers with a maintenance task. In short, RCM is one of the methods a reliability engineer uses, not a replacement for the discipline.
What certification do reliability engineers need?
No certification is universally required to practice. The Certified Reliability Engineer (CRE) from ASQ is the most widely recognized credential specific to the discipline. The Certified Maintenance and Reliability Professional (CMRP) is a related credential with a broader maintenance scope. Many organizations also value Six Sigma training for its statistical root cause methods. In many organizations, a maintenance manager or asset professional performs the function without the formal title.
How does reliability engineering reduce downtime?
Reliability engineering reduces downtime by finding why assets fail and acting on the cause before the next failure. One documented example is Kisuma Chemicals, which reduced downtime by 40% through FMECA-driven reliability work. That is a customer-specific outcome from one failure-analysis method, not a guaranteed result. The gain depends on findings turning into executed, tracked maintenance work. Faster, better-informed diagnosis is also where a reliability program tends to find recoverable time.